Oil seal is the customary name for general seals, which is simply the seal of lubricating oil. It is a mechanical component used to seal grease (oil is the most common liquid substance in the transmission system, and also generally refers to the general liquid substance). Oil leakage. So how much do you know about its installation and shutdown knowledge? The editor of Discount TC oil seal products will take you to a brief understanding.
1. The sealed cavity should be kept full of liquid before starting. When conveying solidified media, the sealed cavity should be heated with steam to melt the media. The crank must be cranked before starting to prevent the soft ring from breaking due to sudden start.
2. For the mechanical seal using the oil sealing system outside the pump, the oil sealing system should be started first. Finally stop the oil sealing system after parking.

3. After the hot oil pump is out of operation, the cooling water in the sealing oil cavity and the end face seal cannot be stopped immediately. The cooling water should be stopped when the oil temperature at the end face seal drops below 80 degrees to avoid damage to the sealing parts.
The above is the description of Discount TC oil seal products: a brief introduction to the knowledge of oil seal installation and shutdown.