Xiamen Badu Seal Co.,Ltd.

Home
Xiamen Badu Seal Co.,Ltd.

About 
About
Xiamen Badu Seal Co.,Ltd.

Products 
Products
Xiamen Badu Seal Co.,Ltd.

New Center 
New Center
- Company News
- Exhibition News
Xiamen Badu Seal Co.,Ltd.

Contact
Xiamen Badu Seal Co.,Ltd.

Video 
Video

CN | EN

language 

中国

韩国





搜索

确认

取消

中文版

English





News Center

Homepage

News

Import rubber o-rings production factory

2022-09-02

Import rubber o-rings production factory Important factors for choosing O-rings

Import rubber o-rings production factory When choosing a seal, we must first consider its tensile strength, tensile stress, elongation, elongation at break, permanent set at break, and stress- strain curve, etc. These are collectively referred to as tensile strength.

2022-09-01

Overview of Wholesale Import rubber o-rings production factory O-rings

Wholesale Import rubber o-rings production factory O-ring seal is referred to as O-ring, which is a rubber ring with a circular cross-section. O-ring is the most widely used seal in hydraulic and pneumatic systems.

2023-05-09

What are the advantages of a quality Import rubber o-rings production factory in china

Professional technical support and after-sales service: A quality Import rubber o-rings production factory in china usually has a professional technical support and after-sales service team, which can provide customers with comprehensive technical support and after-sales service.

2023-02-01

china Import rubber o-rings production factory O-ring selection and precautions

china Import rubber o-rings production factory When choosing O-rings, the new national standard should be selected first. The wire diameters of 2.65 and 3.55 are the most common. When the outer diameter is greater than about 30 and the structure size allows, try to use the wire diameter of 3.55. O-rings for greater compression and contact area.

2022-08-30

Import rubber o-rings production factory Product advantages

1. Import rubber o-rings production factory products are suitable for a variety of sealing forms: static sealing, dynamic sealing, suitable for various materials, dimensions and grooves have been standardized, with strong interchangeability;

2022-08-29

Attention should be paid to the process of customized Import rubber o-rings production factory

Customized Import rubber o-rings production factory When using imported O-rings, the operation quality of the installation process directly determines whether the sealing state is stable, and also has a huge impact on the service life of the O-rings.

2022-08-26

Reasons affecting the shrinkage rate of Import rubber o-rings production factory products

1. The shrinkage rate of Import rubber o-rings production factory products increases with the increase of the rubber content of vulcanized products;2. The shrinkage rate of the rubber O-ring product changes with the hardness of the vulcanized product to form a saddle-shaped curve;

2022-08-25

The advantages of Import rubber o-rings production factory using rubber materials to make O-rings

Import rubber o-rings production factory found that O-rings are convenient and widely used sealing equipment, and they are also the most popular products in sealing products. The products of Import rubber o-rings production factory have a wide range of applications, covering almost all mechanical equipment, especially in high-power machinery, which have high requirements for sealing, which can only be achieved with high-quality O-rings.

2022-08-24

Import rubber o-rings production factory talks about the precautions of O-ring rubber device

The requirements of the Import rubber o-rings production factory for the device O-ring.Before installing the O-ring, the Import rubber o-rings production factory should check the following items:1. Whether the introduction angle is chamfer or rounded according to the drawing; 2. Whether the inner diameter is deburred or not;