Do you know what the precautions for skeleton oil seal supplier are? Let's have a simple understanding together!
1. Receive a fixed number of oil seals.
2. From the oil seal to the assembly, it needs to be kept clean.
3. Before assembly, check the oil seal and measure whether the size of each part of the skeleton oil seal supplier is consistent with the size of the shaft and the cavity. Before installation, the size of the shaft diameter should be clearly compared with the inner diameter of the oil seal to match. The size of the cavity should be compatible with the outer diameter and width of the oil seal. Check whether the lip of the skeleton oil seal supplier is damaged or deformed, and whether the spring is detached or rusted. Prevent the oil seal from laying flat during transportation, and being squeezed and impacted by external forces, which will destroy its roundness.

4. Before assembly, do the machining inspection procedure, measure whether the dimensions of the cavity and the shaft are correct, especially the inner chamfer, there should be no slope, the end face of the shaft and the cavity should be smooth and clean, and the chamfer should be free of damage and burrs. In the assembly part, there should be no burrs, sand, iron filings and other debris in the part where the shaft is installed (chamfering), which will cause irregular damage to the lip of the oil seal. It is recommended to use an r-angle for the chamfering part.
5. In terms of operation skills, you can feel it with your hands to see if it is smooth and round.
6. The skeleton oil seal supplier should not tear the wrapping paper too early before installation to prevent debris from adhering to the surface of the oil seal and bringing it into the work.