Low price flat washer personnel must pay attention to safety in stamping processing, use the machine correctly, and avoid danger; let's take a look at its safety points!
1. Before low price flat washer, it is necessary to carefully check whether the punch guard is in good condition, and whether the clutch brake device of special-shaped stamping parts is flexible, safe and reliable.
2. Low price flat washer seal failure and reasons The objects on the workbench should be cleaned up to prevent them from falling on the foot switch during work, causing the punch to start accidentally and hurt people.
3. When loading and unloading the workpiece, the foot should leave the foot switch.

4. It is strictly forbidden for others to stay around the foot switch.
5. If the workpiece is stuck in the mold, it should be taken out with special tools. The special-shaped stamping parts should not be held by hand, and the feet should be removed from the pedal.
6. After punching a workpiece, hands or feet must leave the button or pedal, the seal failure and the reason to prevent misoperation.
7. When more than two people operate, they should be commanded by one person, and the actions should be consistent, and the special-shaped stamping parts should cooperate with each other.
8. After the work is completed, the power supply should be cut off, the surrounding environment should be cleaned up, and the workpieces, tools, appliances and molds should be placed neatly.