Low price O-ring custom sealing method: According to the type of load, it can be divided into static seal and dynamic seal; according to the main purpose of the seal, it can be divided into hole seal, shaft seal and rotary shaft seal; to install. When installing axially, for the shaft seal, the error between the inner diameter and the diameter d2 to be sealed should be as small as possible;
Low price O-ring custom working substances and working standards: When actually selecting raw materials, the compatibility with working substances should be considered first. It is also necessary to comprehensively consider the working pressure, temperature, continuous working time, operation cycle time and other work standards at the seal.
During installation, it is necessary to maintain the cleaning of the installation environment, especially to prevent dust from entering the installation site. If hard particles enter, it is likely to cause serious damage to the surface of the Low price O-ring custom during the entire operation. In turn, the overall service life of the product is reduced, and the damage of the surface material will also increase the corrosion effect of the internal chemical substances such as fuel, which will lead to greater damage after a period of use.

Before installation, its surface should be cleaned, and the installation part, especially the contact surface, should be completely cleaned. One is to better improve the contact surface between it and the sealing member, which has a more stable sealing effect. It is to inspect the surface of the machine and equipment, and if there are slight gaps and unevenness, it can be dealt with and maintained in time.
Therefore, in the whole process of installing the Low price O-ring custom, it is necessary to ensure that the installation environment and the surface of the Low price O-ring custom are cleaned, and a part of each key point must be properly solved, which will not only make its sealing effect completely Give full play to it, in addition, it can also increase the service life of the product and prevent the occurrence of unexpected and serious damage.