Xiamen Badu Seal Co.,Ltd.

Home
Xiamen Badu Seal Co.,Ltd.

About 
About
Xiamen Badu Seal Co.,Ltd.

Products 
Products
Xiamen Badu Seal Co.,Ltd.

New Center 
New Center
- Company News
- Exhibition News
Xiamen Badu Seal Co.,Ltd.

Contact
Xiamen Badu Seal Co.,Ltd.

Video 
Video

CN | EN

language 

中国

韩国





搜索

确认

取消

中文版

English





News Center

Homepage

News

The plane oil seal

2022-09-09

The plane oil seal supplier(s) china talks about the installation method of skeleton oil seal

The plane oil seal supplier(s) china believes that the skeleton oil seal is a typical representative of the oil seal. Generally speaking, the oil seal refers to the skeleton oil seal. The function of the oil seal is generally to isolate the parts that need to be lubricated in the transmission parts from the output parts, so as to prevent the leakage of lubricating oil.

2022-09-08

Seal structure parameters affecting the performance of customized The plane oil seal

A good The plane oil seal is that, in addition to size, its sealing performance must be considered. The sealing structure parameters of the customized The plane oil seal have a great influence on one aspect, which can also be said to be fatal.

2022-09-07

Method for inspecting The plane oil seal products for compliance

　1. The plane oil seal products check the appearance quality. The surface of the skeleton oil seal must be smooth and free of defects such as burrs, cracks, bubbles, missing corners and impurities embedded; the edge of the oil lip is sharp, without gaps, burrs and unevenness.

2022-09-06

Points for replacing the quality The plane oil seal or shaft and oiling

(1)quality The plane oil seal Before installation, carefully check the appearance of the oil seal according to the regulations. The edge and outer surface of the oil seal lip must be coated with clean oil, and a special tool should be used for press fitting. Make sure that the tool is perpendicular to the plane of the seat hole of the body, and the oil seal should be press-fitted to the seat hole evenly and orderly to avoid crooked or Excessive force may damage the oil seal.

2022-09-05

The plane oil seal factory shares the quality inspection of skeleton oil seals

The plane oil seal factory found that when the machine is working, the radial force of the oil seal lip on the shaft causes an oil film with a thickness of about 2.5mm between the interfaces, which is the essence of the sealing effect of the skeleton oil seal.

2022-07-12

Buy The plane oil seal products

The combined oil seal includes an outer ring disk and a fixed lip, a compression ring is fixed on the inner wall of the outer ring disk, and a fixed structure is fixed on the upper end side of the compression ring, and the fixed lip is fixed on the lower end of the fixed structure .

2022-07-11

Best The plane oil seal introduces the advantages of oil seals

The oil seal is light in weight and less consumables. Each oil seal is a combination of thin-walled metal parts and rubber parts, and its material consumption is very small, so the weight of each oil seal is very light.

2022-07-08

Best The plane oil seal introduces the precautions for oil seal selection

First determine the movement direction of the oil seal at the internal position of the engine oil seal, such as reciprocating, rotating, screwing or fixing;

2022-07-07

The plane oil seal on sales introduces the cause of oil leakage in the oil seal

When the surface of the shaft has high roughness or rust spots, rust spots, burrs, etc., it must be smoothed with gauze before installing the oil seal. At the same time, clean grease should be applied to the corresponding position of the oil seal lip or shaft diameter.