The plane oil seal supplier(s) china believes that the skeleton oil seal is a typical representative of the oil seal. Generally speaking, the oil seal refers to the skeleton oil seal. The function of the oil seal is generally to isolate the parts that need to be lubricated in the transmission parts from the output parts, so as to prevent the leakage of lubricating oil.

　　The plane oil seal supplier(s) china said that the structure of the skeleton oil seal consists of three parts: the oil seal body, the reinforced skeleton and the self-tightening coil spring. The sealing body is divided into bottom, waist frame oil seal structure diagram, cutting edge and sealing lip according to different parts.

　　1. The plane oil seal supplier(s) china believes that the surface roughness and surface quality of the oil seal pairing shell holes are particularly important.

　　2. Machining inspection procedures before assembling the skeleton oil seal and seal, whether the dimensions of each part of the skeleton oil seal are consistent with the dimensions of the shaft and cavity. The shaft cavity and the end face of the shaft cavity are processed smoothly, the chamfering is free from damage and burrs, and the assembly parts are cleaned.

　　3. The plane oil seal supplier(s) china put the sponge sheath on both ends of the split, and evenly apply about 0.5mm of grease to the circumference, so that the open oil seal peels off the sleeve from the split and rotates. On the shaft, remove the sponge sheath, apply DSF special adhesive evenly on the lower section of the oil seal, and peel off the joint to connect the open oil seal with the rotating shaft, remove the sponge sheath, and make it evenly Apply DSF.